| Model | A(mm) | B(mm) | B(mm) | D(mm) | Rated Power | Voltage / Frequency | AirFlow | Noise | Blade | RPM | Diameters | Weight |
| HSD-Y1350 | 1360 | 520 | 1430 | 280 | 600W | 110-415V / 50-60Hz | 660m3/min = 23307 CFM | ≤50 dB | 3 pcs | 550 | 1.35M(53inch) | 48kg |
Three Fan Blades Portable Drum Fan
The three-blade Portable Drum Fan is similar in configuration to the six-blade Portable Drum Fan, both equipped with infinite speed control. The three-blade design reduces resistance, allowing the fan to provide higher airflow at the same power, achieving better energy performance.
Application
Industrial
Commercial
Indoor & Outdoor
Manufacturing Workshop, Warehouses and Logistics Centers
Gyms and Sports Centers, Large Retail Stores and Supermarkets
Indoor Sports Arenas, Open-air Markets, Construction Sites
Feature
Mobility
Multipurpose
Efficiency
Maintain
Equipped with pulleys, easy to move between different work areas, plug and play.
Suitable for a variety of environments. In addition to cooling, it can also be used for air quality control, such as removing smoke, dust, etc.
Provides efficient cooling while consuming less energy.
Simple design allows for daily cleaning and maintenance, extending service life.
Parameters
Main Components
1. Silent and high-quality three-phase asynchronous motor.
2. Motor housing is made of aluminum alloy through diecasting.
3. Reduces temperature rise and increases motor lifespan.
Drive System
1. It adopts frequency conversion controller to accurately control the speed.
2. Controler can smoothly adjust the speed, reducing start-stop impact and extending equipment lifespan.
3. Variable frequency speed regulation is suitable for different working conditions and application scenarios.
4. The speed can be reduced under low load or light load conditions, thereby reducing energy consumption and achieving energy saving goals.
Control System
1. PP Engineering Plastic Blades.
2. Blade profile is calculated using simulation software to obtain the optimal cross-section.
3. Connected with reinforced aluminum alloy structures to prevent blade detachment.
Airfoil-Shaped Fan Blades
1. High-tensile steel wire protective net, coated with anti-rust paint.
2. Prevent foreign objects or fingers from entering the working range of the fan to prevent injury to people.
Safety Components
1. Easily move the fan by gently pushing it.
2. The caster are equipped with a brake device, securely locking the position.
Caster
Application
Indoor Case
Place a fan indoors to circulate air.
Warehouse Case
Place fans in the warehouse to increase air circulation in the warehouse.
Factory Case
Fans are placed on factory assembly lines to cool down workers.
Wooden Package
After taking the fan apart, place it in a wooden box and prepare it for shipping.